Skip to content
Find where every samagri is used, across every remedy, event and place.
TopicVastu

Industrial Vastu

औद्योगिक वास्तु
Sessions, remedies, methods and answers on this topic across all courses.
40 entries13 questions1 sessions

Also known asfactory vastuplant vastuindustry

Remedies, methods and rules

Principleपूर्ण बाहु द्वार

Purna Bahu Dwar: Clockwise Route from Main Door to Boundary Gate

Coming out of the main door and reaching the boundary wall gate by moving clockwise forms purna bahu (complete arm) dwar, which completes the purpose of every outing.

Boundary wall gate placed clockwise from the main door

Principle

Swimming Pool Zones: NNE and NE to East, Avoiding the Shikhi Corner

The best place for a swimming pool is NNE and the North-East through ENE up to the East, leaving out the exact North-East diagonal (Shikhi devta); a sunken pool in the North-West is not good.

NNE, NE (off the diagonal), ENE up to East

Principleउत्संग द्वार

Utsang Dwar: Main Door Directly Facing the Boundary Wall Gate

When the main door of the building and the boundary wall gate stand face to face in one line, the arrangement is utsang (sammukh) dwar, the best door coordination in any direction.

Main door and boundary wall gate opposite each other in one line

Principleकोणों का ढकना

Never Bury a Plot Corner Under a Heavy Mass

The corners of a plot are its biggest sources of energy, and energy flows diagonally from corner to corner through the brahmasthan like a highway. Piling or filling a huge mass over a whole corner zone creates a serious defect.

The four outer corners (vidishas) of the plot at the boundary wall

Principleशल्य

Other Shalya: Buried Furnace, Coal, Ash, Fossils and Kaudi

Besides bones, coal, ash, some animal fossils and kaudi in the ground act as shalya. A furnace (bhatti) left buried under a building ruins the family and the business, and kaudi must never be buried, although gomti chakra can be.

Underground in any plot

Principleमांडना

Mandnas: Element-Balancing Folk Art and How to Make Them

A mandna is a traditional drawn figure whose shape and colours pull cosmic energy and create a field of energy, so each element has its own mandna to balance an imbalanced zone. They work in industrial, commercial and residential buildings.

Wall of the zone whose element is imbalanced

Questions and answers

All 13 questions
When zoning a factory, how are the boundary wall gate and the main factory door each checked?

For the boundary wall door, zone the whole plot; for the main door, zone the constructed area. The main door is the one through which you actually enter the house or factory building, not the boundary wall gate through which a vehicle enters, and both should fall on good pads, the main door above all.

What effect did the transformer placed in the North have on the factory that was visited?

Fire had been put into the water zone. The North is the direction of opportunity, so although the plant can run 24 hours a day for 30 days and makes top-quality goods, it was running at only 25 to 30 percent of capacity because orders and opportunities were not coming.

An 80 x 50 shed has its floor sloping North but its roof sloping West. Is that fine?

No, the westward roof slope is wrong. It disturbs the energy current, so some trouble will persist there, and the roof slope has to be corrected.

In a factory, where should the water used by labour be stored?

In the same places prescribed for underground and overhead water tanks; there is no separate location, whether the water is for the labour or for the owner.

Can a swimming pool be made in the West?

At a large scale it works: a city may have a river, lake or pond in its West, and a big industrial unit may have a large pond in the West, the place of Varun devta.

How can one test whether Parjanya devta is imbalanced, for example when factory machines keep breaking down?

Burn a little peeli sarson at Parjanya's place: if it bursts out in sharp sparks that touch the body, Parjanya is upset or imbalanced, which is why the machines there break down and do not give production. If the trees of the house do not reach their proper height or bear good fruit, Parjanya is displeased. Parjanya is active when a little original chandan applied there spreads its fragrance through the whole house and the residents' wishes come true.

A bone was found on a plot meant for an industry. What must be done before building there?

Removing the bone is not enough; the land needs its rites, just as a house is purified after a death. Do a vastu registry with five coconuts (four corners and the bone spot), remove the affected soil, do agni sanskar with mango wood, ghee and camphor in 16 places and float the ash in flowing water, purify with water and mantra, sprinkle gomutra and plaster with cow dung, put lime and sulphur in the pit, keep a lamp burning there for 24 hours, and mix a little mercury into the soil and the four corners. If the shilanyas had already been done, it is broken and must be redone after purification.

Can yellow mustard or dig vandana reduce a labour shortage in a business?

Yes, dig vandana with yellow mustard helps. The biggest brahmastra for labour problems is a mustard oil lamp lit in the South-East (Agni kon), because Saturn rules labour and mustard oil belongs to Saturn; a black lamp is even better.

In farmhouse landscaping the corners are often hidden for the design. Is that the harmful covering of corners?

Yes, it is not good; industries whose corners were fully covered have suffered losses. The rule concerns the corners of the whole land at the boundary wall: covering inside an industry or along a side is acceptable, but not a corner (vidisha). A small 3 to 4 ft landscaped bed in a corner is fine; the problem is when the whole zone, for example the entire South-East area, is covered.

Which planet does a detergent or chemical company represent?

Chemicals, natural or artificial, belong to Mangal (Mars) and represent the South.

Where should the oil tank be in a food factory?
Can we also get the professions and diseases linked to each door pada?

Yes, every entrance has its related profession and the type of disease it can bring, and some padas are rog dwar (doors of disease). The teacher promised two charts, one for diseases and one for professions, since a complete door study takes seven to eight hours; residential and industrial doors are studied in detail in the industrial vastu module.