A plot or factory map is divided into pishach, manushya, dev and brahma bhoomi. An important machine started on pishach bhoomi never runs properly, while shifting it slightly onto manushya bhoomi makes it work.
A factory built on a river front was washed away by floods twice before a Vastu check showed that the site itself was wrong; a factory should never be built on a river front.
There are 32 door positions, chosen with the help of the nine planets and twelve rashis, and the right one depends on whether the building is a home or a particular industry. Doors are studied as the boundary wall door, the main door, the main chamber door and the combination door.
Boundary wall gate, main door and main chamber door
The South, South-West and West build skill and capability. When the land there is low and the construction in these zones is also the lowest, skills and Saturn (Shani) turn against the owner, and the business does not get the wealth and opportunities it should.
A transformer is fire, and the North is the water zone of opportunity, so a transformer there blocks earnings. In one factory a transformer correctly placed in the West-North-West was shifted at a cost of 5 lakh rupees to the exact North at N3-N4, and the plant ran at only 25 to 30 percent of capacity.
Not in the North (N3-N4); the West-North-West position was correct in the case studied
The swar a land brings on decides its best use: land that activates the Chandra (left) nadi suits homes, temples, schools and finance work, while land that activates the Surya (right) nadi suits business and industry. Land on which both nadis run is the worst of all.
When selecting a plot, flat or industrial land, the energy of the land itself decides about 70 percent of the result, more than slope, shape or surrounding structures. A building made fully as per directional vastu can still fail on land with bad energy.
The zone of an element can bear any amount of that element, so increasing fire in the South-East or South-South-East does not bring theft, fire or accidents, just as raising the South-West only strengthens its earth element.
South-East and South-South-East (fire); South-West (earth)
Industry itself is fire and labour also represents fire, so the fire element is the backbone of any industry. A furnace (bhatti) in the wrong place, or with even a slightly changed angle, directly hits profit.
Furnaces and fire sources in the fire zone (South-East) of the factory
An overhead tank can be built anywhere from the West to the North-West; NNW and the South-West are wrong, and a tank over the staircase is best avoided.
Coming out of the main door and reaching the boundary wall gate by moving clockwise forms purna bahu (complete arm) dwar, which completes the purpose of every outing.
Boundary wall gate placed clockwise from the main door
The best place for a swimming pool is NNE and the North-East through ENE up to the East, leaving out the exact North-East diagonal (Shikhi devta); a sunken pool in the North-West is not good.
When the main door of the building and the boundary wall gate stand face to face in one line, the arrangement is utsang (sammukh) dwar, the best door coordination in any direction.
Main door and boundary wall gate opposite each other in one line
The corners of a plot are its biggest sources of energy, and energy flows diagonally from corner to corner through the brahmasthan like a highway. Piling or filling a huge mass over a whole corner zone creates a serious defect.
The four outer corners (vidishas) of the plot at the boundary wall
Besides bones, coal, ash, some animal fossils and kaudi in the ground act as shalya. A furnace (bhatti) left buried under a building ruins the family and the business, and kaudi must never be buried, although gomti chakra can be.
On tilted plots, directions and zones must be read in degrees with a compass. Vedic vastu never says to treat any corner as Ishaan or to accept a direction however tilted it is, and a wrong reading leads to costly and harmful changes.
Colour changes the speed of work: in a warehouse, the same labourers loaded goods from a red godown in about half the time they needed in a light violet one.
A mandna is a traditional drawn figure whose shape and colours pull cosmic energy and create a field of energy, so each element has its own mandna to balance an imbalanced zone. They work in industrial, commercial and residential buildings.
When zoning a factory, how are the boundary wall gate and the main factory door each checked?
For the boundary wall door, zone the whole plot; for the main door, zone the constructed area. The main door is the one through which you actually enter the house or factory building, not the boundary wall gate through which a vehicle enters, and both should fall on good pads, the main door above all.
What effect did the transformer placed in the North have on the factory that was visited?
Fire had been put into the water zone. The North is the direction of opportunity, so although the plant can run 24 hours a day for 30 days and makes top-quality goods, it was running at only 25 to 30 percent of capacity because orders and opportunities were not coming.
In a factory, where should the water used by labour be stored?
In the same places prescribed for underground and overhead water tanks; there is no separate location, whether the water is for the labour or for the owner.
At a large scale it works: a city may have a river, lake or pond in its West, and a big industrial unit may have a large pond in the West, the place of Varun devta.
How can one test whether Parjanya devta is imbalanced, for example when factory machines keep breaking down?
Burn a little peeli sarson at Parjanya's place: if it bursts out in sharp sparks that touch the body, Parjanya is upset or imbalanced, which is why the machines there break down and do not give production. If the trees of the house do not reach their proper height or bear good fruit, Parjanya is displeased. Parjanya is active when a little original chandan applied there spreads its fragrance through the whole house and the residents' wishes come true.
A bone was found on a plot meant for an industry. What must be done before building there?
Removing the bone is not enough; the land needs its rites, just as a house is purified after a death. Do a vastu registry with five coconuts (four corners and the bone spot), remove the affected soil, do agni sanskar with mango wood, ghee and camphor in 16 places and float the ash in flowing water, purify with water and mantra, sprinkle gomutra and plaster with cow dung, put lime and sulphur in the pit, keep a lamp burning there for 24 hours, and mix a little mercury into the soil and the four corners. If the shilanyas had already been done, it is broken and must be redone after purification.
Can yellow mustard or dig vandana reduce a labour shortage in a business?
Yes, dig vandana with yellow mustard helps. The biggest brahmastra for labour problems is a mustard oil lamp lit in the South-East (Agni kon), because Saturn rules labour and mustard oil belongs to Saturn; a black lamp is even better.
In farmhouse landscaping the corners are often hidden for the design. Is that the harmful covering of corners?
Yes, it is not good; industries whose corners were fully covered have suffered losses. The rule concerns the corners of the whole land at the boundary wall: covering inside an industry or along a side is acceptable, but not a corner (vidisha). A small 3 to 4 ft landscaped bed in a corner is fine; the problem is when the whole zone, for example the entire South-East area, is covered.
Can we also get the professions and diseases linked to each door pada?
Yes, every entrance has its related profession and the type of disease it can bring, and some padas are rog dwar (doors of disease). The teacher promised two charts, one for diseases and one for professions, since a complete door study takes seven to eight hours; residential and industrial doors are studied in detail in the industrial vastu module.